Is plug-in solar legal in Maryland?
One residential system per meter, up to 1,200 W. You must notify the utility before plugging in.
Checked Nov 20, 2026
- Status
- Legal now
- Bill
- HB 1532
- Signed
- May 12, 2026
- Effective
- Jul 1, 2026
- Size limit
- 1,200 W
- Certification
- Certified by a nationally recognized testing lab such as UL. Devices of 391 W or less are exempt from listing rules that would require rewiring.
- Utility
- Notify your utility before installing, with a certification of safety features and capacity. No pre-approval or fee. If a locking disconnect is required, you pay to install it.
- Renters
- Not addressed on the PSC's guidance page.
- HOA or condo
- Not addressed on the PSC's guidance page.
- Exported power
- Not described.
- Electricity rate
- 21.4¢/kWh (Aug 2026), 19.89¢ a year earlier
Before you plug in
Maryland requires notice to your utility before installation, including a certification of the device's safety features and capacity. How you notify varies by utility: a form, an email address or a phone line. The utility can't require approval or charge a fee, but if it requires an automatic locking disconnect, you pay to install it.
The limit is one system per meter, residential use only, up to 1,200 W. Devices of 391 W or less are exempt from listing provisions that would require changes to wiring or the panel.
Next steps
- Check your size, renter or HOA situation
- Estimate payback at 21.4¢ per kWh
- See kits filtered for Maryland